Audi A3
+ Maintenance instruction
+ Current leaving and service
+ Engine
+ Systems of cooling, heating
- Power supply system and production of the fulfilled gases
+ Power supply system
- System of injection of fuel
General information and security measures
Removal, installation and check of the fuel distributive highway and injectors
Check and adjustment of number of turns of the single course/the moment of ignition/concentration WITH
+ System of injection of the diesel engine
+ System of production of the fulfilled gases
+ engine Electric equipment
+ Manual box of gear shifting
+ Automatic transmission and models with a full drive
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Elektroskhema
|
Check and adjustment of number of turns of the single course/the moment of ignition/concentration WITH
Within maintenance adjustment of number of turns of idling, the ignition and concentration moment is not required WITH since the specified parameters are established by a control system depending on requirements.
If the valid parameters differ from set, the reason lies in malfunction of details which should be replaced. The qualified check of a control system demands special diagnostic devices.
ATTENTION
The number of turns of idling can be a little changed by monitor reprogramming by means of the V.A.G device.
|
|
