Audi A3
+ Maintenance instruction
+ Current leaving and service
+ Engine
+ Systems of cooling, heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Manual box of gear shifting
+ Automatic transmission and models with a full drive
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
Electric equipment of system of comfort
Diagnostics of malfunctions of onboard electric equipment - the general information
Check of the electric motor of a screen wiper
Check of warmed back glass
Stoplight check
Removal, installation and check of a sound signal
Safety locks
Fusible inserts - the general information
Chain breakers (thermal relays)
Relay
Replacement of batteries of a key of remote control
Replacement of a battery/lamp of a natural with illumination
Anticreeping blocking
Lighting devices
Replacement of lamps of external lighting
Replacement of bulbs of internal lighting
Removal and headlight installation
Removal and installation of the electric motor of adjustment of range of light
Removal and installation of the forward index of turn
Removal and installation of a back lamp
Adjustment of light of headlights
Devices
Removal and installation of a control panel
Removal and installation of the podrulevy switch
Removal and installation of switches and lamps
Removal, installation and radio receiver coding
Input of a code of a radio receiver
Removal and loudspeaker installation
Removal and installation of the aerial of a roof
Additional installation of a radio telephone on in a special way prepared models
Removal and installation of the electric motor of a forward screen wiper
Removal and installation of the lever and electric motor of a back screen wiper
Removal and installation of a cleaner of back glass
Removal and tank installation with the pump of a stekloomyvatel
Elements темпостата
+ Elektroskhema
|
Removal and headlight installation Headlight with the mechanism of adjustment of range of light
1–clips (6 pieces)
2–rasseivatel
3–consolidation of a rasseivatel
4–headlight case
5–lamp of a passing beam
6–socket
7–electric motor of adjustment of range of light | 8–lamp of a parking light
9–a lamp of a driving beam or a driving beam with antifog light
10-socket
11-consolidation of a cover of the case
12-case |
Back lamp
1–case of a back lamp
2–stoplight lamp / back lamp
3–lamp of a lamp of a backing
4–nuts, 4 N • m | 5–body
6–holder of a lamp
7–lamp of a foggy lamp
8–lamp of a signal of turn |
Back lamp
Rasseivatel and the case of a headlight can be replaced independently from each other. REMOVAL
| PERFORMANCE ORDER |
| 1. Remove the turn index, address to the subsection Removal and installation of the forward index of turn. | | 2. For an exception of damage of a paint and varnish covering at removal of a headlight paste over a bumper around a headlight. | | 3. Turn out lateral bolts of fastening (the shooter on an illustration) Torx T30 key. |
| 4. Turn out the top bolts of fastening by-1-key of Torx T30. | | 5. Turn a headlight–2–to the center of the car (shooter) and then take out forward from a body. |
| 6. Rasstykuyte I will corrode headlights and adjustments of range of light. | | INSTALLATION
| PERFORMANCE ORDER |
| 1. Insert a headlight at first around the central part of the car a pin–1–in directing–2–. | | 2. Join the socket of a headlight and the mechanism of adjustment of range of light. | | 3. Slightly fix a headlight, expose it on a contour of a body and tighten the moment of 6 N • m. |
| 4. Establish the turn index, address to the subsection Removal and installation of the forward index of turn. | | 5. Check headlight adjustment on HUNDRED. | | |
|
|
|
